Home › Installation Info
Installation & Setup

Standard vs Coax Power & Connection Diagrams

Everything you need to choose the right power configuration and connect your Kitz Technologies amplifier correctly.

Standard vs Coax Power Connection Diagrams

Power Configuration

Which Power Version Is Right for You?

All Kitz Technologies TV amplifiers are available in two power configurations. The right choice depends on where you plan to install your amplifier.

Option 1

Standard Powered

The Standard Version is powered through the power connector on the front of the unit. It plugs directly into a nearby 120V AC outlet.

This version is designed to be used inside the house where standard wall power is close by.

Best for:

  • Indoor installations near an outlet
  • Attic installations with accessible power
  • Utility room or equipment closet setups
Option 2

Remote Power — Coax Powered

The Remote Power / Coax Fed Version is designed to feed power from inside the house, via the coax cable, to a remote location where 120V power is not available.

This works great for basement, attic, or mast mounting installations where running a power cable is impractical.

Includes an aluminum fully shielded weatherproof mast mount case.

Best for:

  • Outdoor mast or antenna mast mounting
  • Locations without nearby AC power
  • Weatherproof installations
  • Basement or crawl space runs

Hookup Diagrams

Connection Diagrams

Reference these diagrams when installing your amplifier. Each shows the complete signal path from antenna to TV for the respective power configuration.

Coax Powered

Remote Power / Coax Fed — Connection Diagram

Shows how to run power up the coax cable to the amplifier at the mast or remote location, with the power inserter located indoors near your TV or equipment.

Coax Powered TV Amplifier Connection Diagram
Coax-powered (remote power) installation — power travels from the indoor unit up the coax to the amplifier.
Standard Powered

Standard Power — Connection Diagram

Shows the standard installation where the amplifier is located indoors and powered directly from a 120V AC outlet via the included power supply.

Standard Powered TV Amplifier Connection Diagram
Standard-powered installation — amplifier is located indoors with direct AC power connection.

Not Sure Which Setup Is Right for You?

Give us a call — we'll help you pick the right amplifier and power configuration for your specific installation, free of charge.

Call Us: 920-233-3974